LCD Conditioning
Factory Reset
Exit Menu
Reset all OSD settings to the factory preset values.
Push
to exit the OSD main menu.
PIP
SETTINGS
Back
Mode
When PIP/PBP
activated
PIP/PBP Source
PIP Size
This function brings up a window displaying image from another input source.
PIP/PBP submenu when PIP/PBP OFF
(main source is
VGA/DVI-
D input)
PIP/PBP submenu when PIP/PBP OFF
(main source is Video
input)
or
PIP/PBP submenu when PIP/PBP ON
(main source is
VGA/DVI-
D input)
PIP/PBP submenu when PIP/PBP ON
(main source is Video input)
or
NOTE:
When using DVI source, the contrast adjustment is not available.
Push
to go back to the main menu.
There is two modes: PIP (Picture in Picture) and PBP (Picture By Picture)
Use
and
to browse and
to select "Off", "PIP" or "PBP".
When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.
Select an input signal for PIP
/PBP
. (VGA/DVI-D 1/DVI-D 2/DP (DisplayPort)/HDMI/S-Video/Composite/Component)
Use
and
to browse and
to select.
Select PIP window size.
Use
and
to browse and
to select.
Summary of Contents for 2408WFP - UltraSharp - 24" LCD Monitor
Page 36: ......