Back to Contents Page
Setup: Dell™ Travel Mouse With Bluetooth
®
Technology
System Requirements
To install and operate your Dell Travel Mouse With Bluetooth Technology, either of the following operating systems is required:
l
Microsoft
®
Windows
®
XP, Media Center Edition
l
Windows Vista™
Getting Started
Contents Of The Box
•
Inserting Batteries
•
Setting Up The Mouse
Contents Of The Box
The Dell Travel Mouse With Bluetooth Technology includes the following items:
l
Mouse
l
AA Batteries (2)
l
Software CD
l
User's Guide
Open the package and remove the contents to start the installation.
Inserting Batteries
Insert two AA batteries into the mouse. You must ensure that the batteries are placed properly. Then turn on the mouse using the On/Off switch on its base.
The optical sensor of the mouse will turn on (red) if the batteries are placed properly.
NOTE: Do not press the Connect button at this time.
Setting Up The Mouse
Setting Up Your Dell Travel Mouse With Bluetooth Technology (Part 1)
If you have the Toshiba Bluetooth Software installed on a Dell notebook computer, complete the following steps:
All
the required mouse software is pre-installed on your notebook computer. If you must restore this software, insert the Setup CD, and then follow the on-
screen instructions.
NOTE: To uninstall the SetPoint program, click
Start
®
Settings
®
Control Panel
®
Add/Remove Programs
. In the
Add/Remove Programs
window, select
SetPoint program, and then click
Change/Remove
.
1.
You must turn off any other Bluetooth-enabled mouse. The receiver may detect a Bluetooth-enabled mouse in the range of 10 meters (30 feet).
2.
Ensure that your computer's Bluetooth LED is on (blue), then proceed to the next step.
NOTE: If your computer
’
s Bluetooth LED is off, follow your computer
’
s user manual to enable the Bluetooth radio.
3.
In the Windows taskbar at the bottom of the screen, right-click on the Bluetooth icon, click
Start Bluetooth
, and then follow the instructions to activate
Bluetooth.
4.
In the
Bluetooth Settings
window, click
New Connection
.
5.
D. When the
Add New Connection
wizard appears, press and hold the Bluetooth button on your mouse for 2 seconds, and then click
Next
in the
Add
New Connection
wizard.
NOTE: Ensure that you complete steps 6 and 7 within three minutes; otherwise, return to step 3.
6.
When the
Searching for Bluetooth Devices
window appears, wait for a minimum of 20 seconds to allow your computer to connect with the mouse.
7.
When the connection is complete and Dell Travel Mouse With Bluetooth Technology appears in the list, select the Dell Travel Mouse With Bluetooth
Technology from the list, and then click
Next
.
8.
Close the
Bluetooth Settings
window.
NOTE: You must turn off any other Bluetooth-enabled mouse. The receiver may detect a Bluetooth-enabled mouse in the range of 10 meters (30 feet). If you
experience any issues, complete all the steps again.
NOTE: If you have the Widcomm Bluetooth Software installed or use the Windows Vista operating system on a Dell notebook computer, complete the steps in
part 2 or part 3.
