14
Removing the base frame
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
Before working inside your computer
. After working inside
your computer, follow the instructions in
After working inside your computer
. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1.
Remove the
top cover
.
2.
Remove the
wireless card
.
3.
Remove the
mobile broadband card
.
Procedure
1.
Turn the system upside down.
2.
Remove the screws that secures the bottom cover to the base frame.
1.
screws (4)
2. base frame
3.
Turn the system the over.
4.
Remove the screw from the system grounding port.
24
Summary of Contents for 5000 Series
