Loading paper, transparencies, or envelopes
l
Load paper or transparencies with the left edge of the stack against the stack height label and with the recommended print side face-up.
l
Load envelopes flap side down with the stamp area and flap on the left. The end of the envelope with the stamp area enters the multipurpose
feeder first.
l
Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may severely damage the
printer.
Loading letterhead or preprinted paper
l
Do not fill paper above the load line. Overfilling the tray may cause jams.
l
Follow the illustrations below for loading the paper according to your print job.
6.
Slide the side guide toward the inside of the tray until it lightly rests against the edge of the media.
7.
Set the
Paper Size
and
Paper Type
for the multipurpose feeder (
MP Feeder Size
and
MP Feeder Type
) to the correct value for the print media you
loaded.
a.
Press the
Menu
button
on the operator panel.
b.
Press the
Down
arrow button
until
appears next to
Paper Menu
, and then press the
Select
button
.
c.
Press the
Down
arrow button
until
appears next to
Paper Size/Type
, and then press the
Select
button
.
d.
Press the
Down
arrow button
until
appears next to
MP Feeder Size
/Type
, and then press the
Select
button
.
e.
Press the
Down
arrow button
until
appears next to the media size you loaded, and then press the
Select
button
.
f.
Press the
Right
arrow button
until
appears next to
MP Feeder
Size/
Type
, and then press the
Select
button
.
g.
Press the
Right
arrow button
until
appears next to the media type you loaded, and then press the
Select
button
.
The printer returns to
Ready
.
Print side face-up for
simplex
(single-sided) printing
Print side face-down for duplex printing
Summary of Contents for 5210n Mono Laser Printer
Page 99: ......
