message, or receive
additional bytes of data
from the computer.
NOTE:
Wait Timeout is
only available when
you use PostScript
emulation. This menu
value has no effect on
PCL emulation print
jobs.
When the timer expires, any
partially formatted page still in
the printer is printed, and other
input ports are examined to see if
data exists.
90*
is the default setting.
Recovery
Auto Continue
On
Off
Determines whether or not the
printer continues printing when it
detects the paper unmatched to
your paper setting.
On
: If the paper mismatch
occurs, an error message
will display. The printer
goes offline for 30 seconds,
then automatically clears
the message and continues
printing.
Off
: If a paper mismatch
occurs, an error message
remains on the display,
and the printer remains
off-line until you insert the
correct paper.
Jam Recovery
On
Off
Specifies whether the printer
reprints jammed pages.
On
: Printer reprints
jammed pages.
Off
: Printer does not
reprint jammed pages.
Auto CR
Allows you to append
the required carriage
return to each line
feed.
LF
LF+CR
Refers to the following samples:
Date & Time
(Only if HDD
is installed)
See
"Setting the time
and date"
.
DayLight
Saving
(Only if HDD
is installed)
See
"Setting Daylight
Savings Time"
.
Manual
Auto
Off
Quality
Use this menu selection to change settings that affect print quality and save toner.
