Table 3. Rear view of the system (continued)
Item
Ports, panels, or slots
Icon
Description
5
System identification
button
Press the system ID button:
●
To locate a particular system within a rack.
●
To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
●
To reset iDRAC using system ID, ensure that the system ID button
is enabled in the iDRAC setup.
●
If the system stops responding during POST, press and hold the
system ID button (for more than five seconds) to enter the BIOS
progress mode.
6
NIC port (1)
The NIC ports are embedded on the LOM card that is connected to the
system board.
7
USB 3.0 port (1)
The USB ports are 9-pin, 3.0-compliant. These ports enable you to
connect USB devices to the system.
8
USB 2.0 port (1)
The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
9
NIC port (2)
The NIC ports are embedded on the LOM card that is connected to the
system board.
10
iDRAC ethernet port
Enables you to remotely access iDRAC. For more information, see the
Integrated
Dell Remote Access Controller User's Guide
at
.
11
VGA port
Enables you to connect a display device to the system. For more
information about the VGA port, see the
Dell EMC PowerEdge T350
Technical Specifications
on product documentation page.
12
Serial port
Enables you to connect a serial device to the system. For more
information about the Serial port, see the
Dell EMC PowerEdge T350
Technical Specifications
on product documentation page.
PowerEdge T350 system overview
13
