Removing the computer base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
base panel
.
2
Remove the
memory modules
.
3
Remove the
solid-state drives
.
4
Follow the procedure from step 1 to step 5 in “Removing the
hard drive
".
5
Remove the
wireless card
.
6
Remove the
I/O board
.
7
Follow the procedure from step 1 to step 11 in “Removing the
palm rest
”.
8
Remove the
hinge covers
.
9
Remove the
speakers
.
10
Remove the
front AlienFX LED boards
.
11
Remove the
display assembly
.
12
Follow the procedure from step 1 to step 10 in “Removing the
system
board
”.
13
Remove the
fans
.
14
Remove the
battery
.
15
Remove the
power-adapter port
.
Procedure
After performing the prerequisites, we are left with the computer base.
136
Summary of Contents for Alienware 15
