Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Using the alignment posts, place the speakers on the computer base.
2
Route the speaker cable through the routing guides on the battery and
computer base.
3
Adhere the front AlienFX LED cable to the battery.
4
Connect the front AlienFX LED cable to the system board and secure it
with the tape.
5
Connect the speaker cable to the system board.
Post-requisites
1
Follow the procedure from step 5 to step 11 in “Replacing the
palm rest
”.
2
Replace the
solid-state drives
.
3
Replace the
memory modules
.
4
Replace the
base panel
.
70
Summary of Contents for Alienware 15
