background image

Wi-Fi

Alienware Aurora R6 is shipped with Wi-Fi 802.11b/g/n or Wi-Fi 802.11ac.

Turning on or off Wi-Fi

NOTE: There is no physical switch to enable or disable Wi-Fi. It has to 
be done through computer settings.

Swipe-in from the right edge of the display, or click the 

Action Center

 icon 

on the taskbar to access the Action Center.

Click 

Wi-Fi

 to turn Wi-Fi on or off.

Downloading the Wi-Fi driver

Turn on your computer.

Go to 

www.dell.com/support

.

Click 

Product support

 enter the Service Tag of your computer, and then 

click 

Submit

.

NOTE: If you do not have the Service Tag, use the auto-detect 
feature or manually browse for your computer model.

Click 

Drivers & downloads

 → 

Find it myself

.

Scroll down the page and expand 

Network

.

Click 

Download

 to download the Wi-Fi driver for your computer.

After the download is complete, navigate to the folder where you saved the 
Wi-Fi driver file.

Double-click the driver file icon and follow the on-screen instructions to 
install the driver.

Identifying the Wireless drivers

On the taskbar, click the search box, and then type 

Device Manager

.

Click 

Device Manager

.

The 

Device Manager

 window is displayed.

147

Summary of Contents for Aurora R6





































































































































































Reviews: