130
Brocade Adapters Troubleshooting Guide
53-1002145-01
HCM and Installer Message Reference
B
Enter a valid host name
or IP address
Occurs when the user clicks Add button in the
Syslog Server Configuration dialog box without
providing any host name or IP address or by
providing an invalid host name or IP address.
Enter a valid host name and IP
address in the host name field of
the Setup for Discovery dialog box.
Enter a valid host name/IP address
in the Host name/IP address field of
Syslog Server Configuration dialog
box.
Enter a valid number for
the test cycle.
Occurs when invalid number is provided in Test
Cycle field.
Enter a valid number within the limit
for the test cycle.
Event Filter cannot be
launched while the Event
Properties dialog is
open.
Occurs when the user tries to launch the
Master Log Filter dialog box while the Event
Properties dialog box is open.
Close the Event Properties dialog
box, and then launch the Master Log
Filter dialog box.
Failed to connect to the
Agent
Occurs when the agent connection is lost.
Start the HCM agent service, and
then proceed.
Failed to create virtual
port:
Occurs when there is a error while creating
virtual ports.
Determine why the error happens
when creating a virtual port.
Failed to refresh the
team data due to an
unexpected error.
<Runtime Reason>
Occurs when an error occurs while refreshing
the team data.
Determine why the error happens,
and then proceed.
Failed to restore the
VLAN and Team
configurations. Reason:
Caused by no saved
configurations.
Occurs when there is VLAN/Teaming
configuration file is not present to restore when
user clicks Tool > Restore Data > VLAN and
Team.
The VLAN and Teaming
configuration save will only occur
during installation or upgrade of
network or intermediate drivers
through the Brocade Adapters
Software Installer (BASI). There
must be a saved configuration for a
successful restore.
Failed to restore the
VLAN and Team
configurations.
<Runtime Reason>
Occurs when the restore of VLAN and Team
configuration fails in HCM.
Retry the operation.
Fibre Channel Trunking
cannot be enabled on
the adapter {0} while
QoS or TRL is enabled on
the port {1}.
Quality of Service (QoS) or Target Rate Limiting
(TRL) is enabled on an associated port.
Make sure QoS or TRL is disabled in
any of the associated ports.
Found duplicate
name(s). Please resolve.
Occurs when the user selects
User/Administrator will manually fix option in
the Duplicated Names dialog box and does not
provide a unique name.
Provide a unique name in the
Duplicated Names dialog box.
Frame Count for PCI
Loopback Test cannot be
empty. Enter valid data.
Occurs when the Frame Count field is left
empty while executing a PCI loopback test.
Error message.
TABLE 14
Host Connectivity Manager messages (continued)
Message
Cause
Corrective Action or Notes
Summary of Contents for Brocade 815
