Table 14. System setup options—System Management menu (continued)
System Management
Asset Tag
Creates a system Asset Tag that can be used by an IT administrator to
uniquely identify a particular system. Once set in BIOS, the Asset Tag cannot
be changed.
Wake on LAN/WLAN
Wake on LAN/WLAN
Enables the computer to be powered on by special LAN signals.
Default: Disabled
Auto On Time
Auto On Time
Controls automatic powering up of system for defined days and times.
Default: Disabled
SERR Messages
Enable SERR Messages
Enables or disables SERR message mechanism. Some graphics cards require
that SERR message mechanism be disabled.
Default: ON
First Power On Date
Set Ownership Date
Enable or disable setting of Ownership date.
Default: OFF
Table 15. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection
Enables or disables report of keyboard-related errors when the computer
boots.
Default: ON
Numlock LED
Enable Numlock LED
Enables or disables Numlock when the computer boots.
Default: ON
Table 16. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Warnings and Errors
Warnings and Errors
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt, and wait for user input
when warnings or errors are detected.
NOTE:
Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Fastboot
Fastboot
Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization
during boot.
Extend BIOS POST Time
Extend BIOS POST Time
Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds
72
BIOS setup
