Dynamically unify your data center. Visit
Dell.com/Compellent.
© 2013 Dell Inc. All rights reserved. Dell, the DELL logo, the DELL badge, and Compellent are trademarks of Dell Inc. Other trademarks and trade names
may be used in this document to refer to either the entities claiming the marks and names or their products. Dell disclaims proprietary interest in the
marks and names of others. This document is for informational purposes only. Dell reserves the right to make changes without further notice to any
products herein. The content provided is as is and without express or implied warranties of any kind.
Feature
Compellent SC280 technical specification
Controller hardware
Dell Compellent SC8000
Software
Dell Compellent Storage Center 6.4 or later
Scalability
Can hold either 84 or 42 SAS HDD 3.5” 4TB drives per enclosure
Capacity
Up to 336TB per 5U enclosure
Drives
SAS HDD 3.5” 4TB drives
Height
22.230 cm (8.8 in)
Width
48.260 cm (19 in)
Depth
91.44 cm (36 in)
Weight
130.7 kg (287.5 lb) maximum configuration
Power/wattage
Two 2184W hot-swappable power supplies; 1800W maximum power
Heat dissipation
6,143 BTU/hr maximum (five hot-swappable fans)
Voltage
208-240 VAC
Frequency
50/60Hz
Amperage
7.4 A at 241V maximum current
Operating temperature
5˚C to 35˚C (41˚F to 95˚F)
Global services and support
Dell Services can help reduce IT complexity, lower costs, and eliminate inefficiencies by making IT and business
solutions work harder for you. The Dell Services team delivers distinctive capabilities, including Copilot support
and optimization as well as full data migration solutions to facilitate consolidation from multiple file systems. Dell
takes a holistic view of your needs and designs solutions for your environment and business objectives while
using established delivery methods, local talent and in-depth domain knowledge to help lower your total cost of
ownership.
1
Based on February 2013 internal Dell analysis comparing SC280 to comparable 2U 3.5” disk drive enclosures
(ad#G13001371).
2
Two SC280 enclosures are supported on the same I/O chain/loop. SC200 and SC220 enclosures can be connected to the
same 6Gb SAS I/O card in the controller as an SC280, but must be on a different chain/loop.
August 2013
