Powering the system
This system can be powered using a 65 W adapter (4.5 mm input power source) or through the USB Type-C cable connected
to a display capable of providing power delivery of 65 W or greater. During normal operation, when the device is connected
with a single power source (primary power source), connecting a second power source and disconnecting the primary power
source will shut down the device. However, if the secondary power source is disconnected while the primary power source is
connected, the system continues to operate normally.
When the device is powered with both the power sources—AC adapter and USB Type-C cable, the AC adapter is the primary
power source and USB Type-C is the secondary power source. Disconnecting the AC adapter will shut down the system. If the
secondary power source is disconnected, the system continues to operate normally.
NOTE:
Hotswap between the AC adapter and USB Type-C power source is not supported.
Table 1. Powering the system
Primary Power Source
Secondary power source
connected
Power source disconnected
Operation
AC Adapter
Rear Type-C
AC Adapter
Shut down
AC Adapter
Rear Type-C
Rear Type-C
Normal operation
Rear Type-C
AC Adapter
AC Adapter
Normal operation
Rear Type-C
AC Adapter
Rear Type-C
Shut down
2
14
Powering the system
