Table 28. POST Behavior(continued)
Option
Description
•
Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or
the previous POST did not complete.
•
Thorough — The system does not skip any steps in the boot process.
•
Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to
Thorough
by default.
Extend BIOS POST Time
This option creates an additional pre-boot delay.
•
0 seconds (default)
•
5 seconds
•
10 seconds
Full Screen Logo
This option will display full screen logo if your image match screen resolution. The option
Enable Full
Screen Logo
is not set by default.
Warnings and Errors
This option causes the boot process to only pause when warning or errors are detected. Choose any
one of the option:
•
Prompt on Warnings and Errors - default
•
Continue on Warnings
•
Continue on Warnings and Errors
Manageability
Table 29. Manageability
Option
Description
Intel AMT Capability
This option enables you to enable or disable Intel AMT capability. The options are:
•
Disabled
•
Enabled—enabled by default
•
Restrict MEBx Access
USB provision
This option is disabled by default.
MEBx Hotkey
This option is enabled by default.
Virtualization support
Table 30. Virtualization Support
Option
Description
Virtualization
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by the Intel Virtualization technology.
•
Enable Intel Virtualization Technology
This option is set by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by the Intel Virtualization technology for direct I/O.
•
Enable VT for Direct I/O
This option is set by default.
System setup
31