6
DELLD2421DS
2
Tear off 4 pieces of aluminum foil (pic.7.1)
then
disconnect the keypad cable from the
connectors of the main board(pic.7.2). Tearoff
2 pieces tape, disconnect the backlight cable
from the connectors of the power board and
panel module(pic.7.3).
Pic.7.1
Pic.7.2
Lift up the bracket chassis module and put it
on a protector cushion. Please payattention
to ESD protection(wear ESD ring and so on).
Turn over the bracket chassis. Use a screwdriver
to remove 8 screws(bottom side*4,inside*4)
(Pic.9.1&2), Tear off the black tape(Pic.9.3)
(No.1~8 screw size=M3x6; Torque=4.5~6.5 kgfxcm
Pic.9.1
Pic.7.3
Disconnect the LVDS cable from the connectors of
the main board andpanel module
Pic.9.2
Pic.9.3
S6
S
8
S9
S7
