Microprocessor Thermal-Cooling Assembly: Dell Latitude D800 Service Manual
Microprocessor Thermal-Cooling Assembly
Dell™ Latitude™ D800 Service Manual
Removing the Microprocessor Thermal-Cooling Assembly
CAUTION:
Before performing the following procedures, read the safety instructions
in your
System Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
1. Follow the instructions in "
Preparing to Work Inside the Computer
."
2. Remove the
.
3. Remove the
4. Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the
microprocessor thermal-cooling assembly to the system board.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...tude/D800/D800%20SERVICE%20MANUAL/thermal.htm (1 of 3)6/21/2004 2:17:01 AM