2
Environmental and operating conditions
Environmental conditions
Table 5. Environmental conditions
Ingress protection rating
IP50
CAUTION: Install the Edge Gateway in an area that is not exposed to direct sunlight.
NOTE: For outdoors and rugged environments, install the Edge Gateway in an external enclosure (sold separately).
Operating conditions
Table 6. Operating conditions
Maximum vibration
Operational
•
5 Hz with 0.002 G
2
/Hz
•
350 Hz with 0.002 G
2
/Hz
NOTE: Operational values are based on the 0.26
Grms profile. These values are tested for all
operational orientations and are retrieved from two
minutes per test orientation with IO meter.
NOTE: All screws on the Edge Gateway are
embedded with a Nylock seal to resist vibration and
loosening.
Maximum shock
Operational
Half sine shock
All operational orientations; 40G ± 5% with pulse duration of
2 msec ± 10% (equivalent to 20 in/sec [51 cm/sec])
Non-operational
Half sine shock
Tested on all six sides; 160 G ± 5% with pulse duration of 2
msec ± 10% (equivalent to 50 in/sec [127 cm/sec])
Maximum altitude
Operational (maximum, unpressurized)
–15.20 m to 5,000 m (–50 ft to 16,404 ft)
NOTE: The maximum temperature is derated
1°C/305 m (1000 ft) above sea level altitude.
Non-operational (maximum, unpressurized)
–15.20 m to 10,668 m (–50 ft to 35,000 ft)
Operating environment
Temperature range (system)
•
Operating: –30°C to 70°C (–22°F to 158°F)
6