DC parameters
System full load
12.9 W
NOTE: Operating system active with 100% processor
utilization and simultaneous access to I/O devices.
Recommended power supply
17 W (20% derating)
NOTE: With consideration of voltage derating under
high environmental temperature.
Table 8. PoE parameters
PoE parameters
Compatibility
IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x,
IEEE802.3af
NOTE: Full-controller compliance with IEEE
802.3.af standard for maximum 15.4 W, with power
up to 48 V over existing Ethernet infrastructure,
with no modifications required.
NOTE: Standard IEEE 802.3 Ethernet interface
provided for 100BASE-TX and 10BASE-T
applications (802.3, 802.3u, 802.3ab, and 802.3x)
9014-bytes jumbo frame support.
Number of ports
One Fast Ethernet Media Access Control (MAC) port and
one physical layer (PHY) port
Speed
10/100 Mbps (supports Wake on LAN and WLAN)
Connector
8-pin RJ45
Protection
Built-in 2.25 KV isolation protection on LAN ports and ESD
IEC61000-4-2 ±30 KV
Power input
15.4 W maximum according to IEEE 802.3af-2003
(standard)
Supported input voltage
48 V DC
Supported input current
0.27 A
Ignition
Table 9. Ignition parameters
Parameter
Minimum voltage
Maximum voltage
Default
High-level input voltage (V
IH
)
9 V
32 V
12 V
Low-level input voltage(V
IL
)
0 V
1.2 V
0 V
9