Automatic Save
With the OSD open, if you make an adjustment and then either proceed to another menu or exit the OSD, the monitor automatically saves any adjustments
you have made. If you make an adjustment and then wait for the OSD to disappear the adjustment will also be saved.
OSD Warning Messages
A warning message may appear on the screen indicating that the monitor is out of sync.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to
use. See Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1024 X 768 @ 60Hz.
Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer.
See
Solving Problems
for more information.
Setting the Optimal Resolution
For optimal display performance while using the Microsoft
®
Windows
®
operating systems, set the display resolution to 1024 x 768 pixels by performing the
following steps:
1.
Click
Start
, point to
Settings
, and click
Control Panel
.
2.
Double-click the Display icon in the
Control Panel
window, and then click the
Settings
tab.
3.
In the
Desktop
area, move the slidebar to 1024 by 768 pixels, then click
OK
.
Recommended frequency for best performance is 60Hz.
Back to Contents Page
NOTE:
A Test-pattern window will appear on-screen if the monitor cannot sense a video signal.
