Disable/Enable touch
Disable Touch stops touch information from reaching Windows for this touch screen. This feature may also be activated from the Tool Tray utility. Disabling
touch has no effect on the operation of the standard mouse.
Show right mouse button tool
Show right mouse button tool launches this feature for this monitor. See
Dell Right Mouse Button Tool (RMBT)
for a complete description of this feature.
Edge acceleration tool
Edge Acceleration Tool launches this utility for this monitor. See
Edge Acceleration Tool (EAT)
for a complete description of this feature.
Right-click on Hold Feature
Right click on hold feature enables you to create right-clicks on the touch screen without running the Right Mouse Button Tool. If you touch the screen and
hold, a right-click is generated on the screen, if you remain within the right-click area and after the right-click delay time-out has occured. The right-click delay
allows you to perform other touch screen operations normally.
When the Right click on hold feature is turned on, the delay value is set to a minimum of 25 milliseconds.
l
To enable this feature, select
Enable right click on hold
.
l
To enable this feature for all touchscreens, select the
Apply to all touchscreens
check box.
Right click delay
defines the right click delay value in milliseconds. The right click delay allows the users to perform other touch screen operations normally.
Right click Area
defines the area size that generates a right click. This feature allows you to touch within a larger area.
Dell Right Mouse Button Tool (RMBT)
Right Mouse Button tool allows a Windows right mouse button simulation on the touch screen.
A representation of a typical two-button mouse is displayed in a small window on the desktop, when this application is run. The initial presentation of the
RMBT shows the left button shaded, indicating that the left button is active. Any touch on the desktop or an application will produce a left button click
consistent with the Button settings in the Control Panel.
A touch in the RMBT will change the shading to show the right mouse button active. Now any touch on this monitor on which RMBT is running will produce a
right button click.
NOTE:
Right click on hold is enabled only in "Mouse emulation" touch mode.
