background image

 About Your Monitor 

    

13

Environmental Characteristics

The following table lists the environmental conditions for your monitor:

Model Number

E2418HN

Compliant Standards

• 

RoHS-compliant

• 

TCO-Certified Displays

• 

PVC/BFR/CFR-reduced 

• 

Arsenic-Free glass and Mercury-Free for the panel only

Temperature 

• 

Operating

0 °C to 40 °C (32 °F to 104 °F)

• 

Non-operating

Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Shipping: -20 °C to 60 °C (-4 °F to 140 °F)

Humidity

• 

Operating

10 % to 80 % (non-condensing) 

• 

Non-operating

Storage: 5 % to 90 % (non-condensing)
Shipping: 5 % to 90 % (non-condensing) 

Altitude

• 

Operating

5,000 m (16,404 ft) max

• 

Non-operating

12,191 m (40,000 ft) max

Thermal dissipation

85.3 BTU/hour (maximum) 
75.1 BTU/hour (typical)

Power Management Modes

If you have VESA’s DPM compliance display card or software installed in your PC, the 
monitor automatically reduces its power consumption when not in use. This is referred 
to as Power Save Mode*. If the computer detects input from keyboard, mouse, or other 
input devices, the monitor automatically resumes functioning. The following table 
shows the power consumption and signaling of this automatic power-saving feature: 

VESA Modes  Horizontal 

Sync 

Vertical 

Sync  Video 

Power 

Indicator  Power Consumption 

Normal operation  Active 

Active 

Active  White

25 W (Maximum)**
22 W (Typical) 

Active-off mode 

Inactive 

Inactive Blank Glowing 

white

Less than 0.3 W 

Switch off 

-

-

Off 

Less than 0.3 W 

Summary of Contents for E2418HN

















































Reviews: