Figure 48. Removing and installing a processor
1.
close first
socket-release lever
2. pin-1 indicator of processor
3. processor
4. slot (4)
5. processor shield
6.
open first
socket-release lever
7. socket
8. socket keys (4)
d. Hold the tab on the processor shield and rotate the processor shield upward until the
open first
socket-release lever lifts up.
CAUTION: The socket pins are fragile and can be permanently damaged. Be careful not to
bend the pins in the socket when removing the processor out of the socket.
e. Lift the processor out of the socket and leave the
open first
socket-release lever up.
NOTE: If you are permanently removing the processor, you must install a socket protective
cap in the vacant socket to protect the socket pins and keep the socket free of dust.
NOTE: After removing the processor, place it in an anti-static container for reuse, return, or
temporary storage. Do not touch the bottom of the processor. Touch only the side edges of
the processor.
Related Links
Removing the cooling shroud
Installing a processor
115
