Removing the internal hard-drive bay
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
.
2.
Keep the #2 Phillips screwdriver ready.
3.
Follow the procedure listed in
Before working inside your system
Steps
1.
Disconnect the data and power cable(s) from the hard drive(s).
2.
Loosen the two captive screws securing the internal hard-drive bay to the chassis.
3.
Lift the internal hard-drive bay up and out of the chassis.
Figure 24. Installing and removing the internal hard-drive bay
1.
cabled hard drives (4)
2. captive screws (2)
3. internal hard-drive bay
Related Links
Installing the internal hard-drive bay
71
