C
Cloud LED
NOTE: To utilize the Cloud LED, download the necessary tools and drivers from
www.dell.com/support
.
One unique feature of the Edge Gateway 3000 Series is the
Cloud LED
. Cloud LED enables you to visually inspect the operational
status of the Edge Gateway by looking at the display light on the left panel of the Edge Gateway.
To enable this feature, you must expose and program a GPIO register on the Edge Gateway.
Follow these steps to control the Cloud LED on the Edge Gateway:
1.
Download the Cloud LED utility from
www.dell.com/support
.
2.
Extract the following files:
a.
DCSTL64.dll
b.
DCSTL64.sys
c.
DCSTL64.inf
d.
DCSTL64.cat
e.
CloudLED.exe
NOTE: These files must be in the same directory.
3.
Run the CloudLED.exe from Command Prompt or Power Shell with administrative rights. The accepted commands are as
follows:
•
CloudLED.exe ON
•
CloudLED.exe OFF
TPM Support
Windows 10 IoT Enterprise LTSB 2016 supports TPM 2.0. For more information about TPM resources, see
technet.microsoft.com/en-us/library/cc749022(v=ws.10).aspx
.
System Shutdown and Restart
Click
Start
and then press
Power
then
Restart
or
Shutdown
the Edge Gateway.
LAN/WLAN Network configuration
Click
Start
and then type
6HWWLQJV
and open the
Settings
window. Select
Network & Internet
from the settings menu.
Bluetooth configuration
Click
Start
and then type
6HWWLQJV
and open the
Settings
window. Select
Devices
from the settings menu and then select
Bluetooth
from the menu on the left panel.
WWAN (5815) Network configuration
NOTE: Ensure that the micro-SIM card is already activated by your service provider before using it in the Edge Gateway.
For more information, see
activate your mobile broadband service
.
Follow the Service Manual to install and configure the WWAN module and the corresponding micro-SIM card for the system. Follow
these steps after the WWAN module (5815) and the micro-SIM cards are installed:
1.
Click
Start
and then type
6HWWLQJV
and open the
Settings
window.
2.
Select
Network & Internet
from the
Settings
menu.
3.
Locate the WWAN connection in the Wi-Fi section and select the entry to connect and disconnect from the WWAN adapter.
50
