Replacing the base frame
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Place the base frame on the bottom cover.
2
Connect the Dip Switch board cable and status-light board cable to the
system board
3
Route the wireless card cables and mobile broadband card cables
through the routing guides.
4
Replace the system grounding port screw.
5
Turn the system over.
6
Replace the screws that secures the bottom cover to the base frame.
7
Turn the system right side up.
Post-requisites
1
Replace the
mobile broadband card
.
2
Replace the
wireless card
.
3
Replace the
top cover
.
33
