Control panel
Left control panel
Figure 4. Left control panel - Status LED
Table 1. Left control panel - LED indicator description
Indicator
Description
Status
1
System health
Blinks amber for 2 seconds and is OFF for 1 second when the chassis health has degraded. By
default, the LED is unlit.
2
System temperature Blinks amber for 2 seconds and is OFF for 1 second when a thermal fault exists on the enclosure. By
default, the LED is unlit.
NOTE:
A thermal fault includes excessive ambient temp, I/O modules thermal status,
PSU thermal status, and fan status.
3
I/O module health
Blinks amber for 2 seconds and is OFF for 1 second when an I/O module is faulty. By default the
LED is unlit.
4
Fan health
Blinks amber for 2 seconds and is OFF for 1 second when a front or rear mounted fan fails or has a
warning. By default, the LED is unlit.
5
Stack or group
Indicates that the enclosure is a member of a group.
6
LED status bar
Indicator status
Description
Solid blue
Indicates that the enclosure is healthy.
Blinking blue
Indicates that the system ID mode is active.
Blinking amber
Indicates that the system is experiencing a fault.
7
System ID button
Allows you to identify the system or the installed sleds.
Enclosure overview
13
