Interfaces
Document/Section
Management
module and Quick
Sync 2 (optional)
See
Dell Integrated Dell Remote Access Controller User's Guide
at
Dell.com/idracmanuals
NOTE:
To access the management module, ensure that all the management modules are connected to the network. You can also
access the management module through the shared LOM mode, if you have opted for a system that has the shared LOM mode
enabled.
Log in to the management module
You can log in to management module as:
•
Management module user
•
Microsoft Active Directory user
•
Lightweight Directory Access Protocol (LDAP) user
If you have opted for secure default access to management module, the management module secure default password is available on the
information tag available on the front of the enclosure. If you have not opted for secure default access to management module, then the
default user name and password are
root
and
calvin
. You can also log in by using Single Sign-On or Smart Card.
NOTE:
You must have the management module credentials to log in to management module.
NOTE:
Ensure that you change the default username and password after setting up the management module IP address.
For more information about logging in to the management module, see the
Dell EMC OpenManage Enterprise Modular User's Guide
at
Dell.com/manuals
.
Methods of setting up and configuring the IP address for the management
module
You can configure management module IP using the following:
1
Management module web interface
2
Remote Access Controller ADMin (RACADM)
3
Remote Services that include Web Services Management (WS-Man)
Methods to download firmware and drivers
You can download the firmware and drivers by using any of the following methods:
Table 8. Firmware and drivers
Methods
Location
From the Dell EMC support site
Dell.com/support/home
Using Dell Repository Manager (DRM)
Dell.com/openmanagemanuals
> Repository Manager
Using Dell OpenManage Essentials (OME)
Dell.com/openmanagemanuals
> OpenManage Essentials
Using Dell Server Update Utility (SUU)
Dell.com/openmanagemanuals
> Server Update Utility
Using Dell OpenManage Deployment Toolkit (DTK)
Dell.com/openmanagemanuals
> OpenManage Deployment Toolkit
22
Initial system setup and configuration
