Figure 38. Removing a management module
Next steps
1
Install the management module
or
Install a blank
.
2
Connect the network cables to the module.
Disabling a forgotten Management Module password
The software security feature of the system includes a Management Module password. The Management Module password jumper
enables or disables Management Module password features and clears any Management Module passwords in use.
Prerequisite
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Steps
1
Power off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2
Remove the Management Module.
3
Move the jumper on the Management Module from pins 2 and 3 to pins 1 and 2.
Installing and removing system components
51
