CL5846
Screws (2)
Screws (2)
Front
Rear
Figure 20. Securing the front of the shelf
Installing and locking the front bezel
Prerequisites
CAUTION:
Remove the protective plastic strip from the front of the bezel before you install the bezel. Failure to
remove this strip will cause the system to overheat.
About this task
NOTE:
If the rack is equipped with a door on the front, the shelf ships with an EMI shield instead of a bezel.
Steps
1. Align the bezel with the shelf.
2. Gently push the bezel into place until it latches.
3. Secure the bezel by turning the key in the lock.
Install the Disk Shelves in the Rack
23