About this guide
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting your
switch, inserting modules, and connecting to a power source.
CAUTION:
To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this
equipment.
NOTE:
Only trained and qualified personnel can install this equipment. Read this guide before you install and power up this
equipment. This equipment contains two power cords. Disconnect both power cords before servicing.
NOTE:
This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product tag
NOTE:
When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical
transceiver ports. Avoid exposure to laser radiation. Do not stare into open apertures.
Regulatory
Marketing model S5148F-ON is represented by the regulatory model E21W and the regulatory type E21W001.
Topics:
•
•
Related documents
For more information about the S5148F-ON switch, see the following documents:
●
OS10 Enterprise Edition User Guide
●
OS10 Enterprise Edition Release Notes
●
S5148F-ON Set-up Guide
●
S5148F-ON Release Notes
●
Open Networking Hardware Diagnostic Guide
NOTE:
For the most recent documentation, see the Dell EMC support site:
.
1
About this guide
5
