Figure 2 Sliding the 2.5" disk drive orange release button down
4. Grasp the latch and pull the disk from its slot to remove it.
Remove a storage processor
This procedure describes how to remove a storage processor.
Procedure
1. Label each of the cables as to their connection location. Taking a photograph
for reference is also helpful for re-connecting the cables.
2. Disconnect the power and data cables from the rear of the storage processor.
3. On the storage processor extractors, push up on the release buttons (1), and
rotate the storage processor extractors down until they come to a complete
stop (2). The storage processor will be extracted approximately 1-inch from the
chassis.
WEEE Disassembly Instructions
Disassembly instructions
11
