Related
Commands
service-queue
– assigns a class map and QoS policy to different queues.
policy-aggregate
– allows an aggregate method of configuring per-port QoS using policy maps.
service-policy output
– applies an output policy map to the selected interface.
qos-policy-input
Create a QoS input policy on the router.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
qos-policy-input
qos-policy-name
[layer2]
To remove an existing input QoS policy from the router, use the
no qos-policy-input
qos-policy-name
[layer2]
command.
Parameters
qos-policy-name
Enter the name for the policy map in character format (32 characters
maximum).
layer2
(OPTIONAL) Enter the keyword
layer2
to specify a Layer 2 Class
Map. The default is Layer 3.
Defaults
Layer 3
Command Modes
CONFIGURATION
Command History
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 8.2.1.0
Policy name character limit increased from 16 to 32.
Version 7.6.1.0
Introduced on the C-Series and S-Series.
Version 7.5.1.0
Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
Use this command to specify the name of the input QoS policy. After the input policy is
specified, rate-police can be defined. This command enables Qos-Policy-Input Configuration
mode— (conf-qos-policy-in).
When changing a Service-Queue configuration in a QoS policy map, all QoS rules are deleted
and re-added automatically to ensure that the order of the rules is maintained. As a result, the
Matched Packets value shown in the
show qos statistics
command is reset.
NOTE: On ExaScale, FTOS cannot classify IGMP packets on a Layer 2 interface using
Layer 3 policy map. The packets always take the default queue, Queue 0, and cannot be
rate-policed.
1204
Summary of Contents for Force10 Z9000
