Command Modes
EXEC
Command History
Version 8.3.11.1
Introduced on the Z9000.
Version 7.6.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
If you want to log in without being prompted for a password, log in through RSA authentication.
To do that, you must first add the SSHv2 RSA public keys to the list of authorized keys. This
command adds the specified RSA keys to the following file:
flash://ADMIN_DIR/ssh/
authorized-keys-username
(where
username
is the user associated with this
terminal).
NOTE: The
no
form of this command deletes the file
flash://ADMIN_DIR/ssh/
authorized-keys-username
file.
Related
Commands
show ip ssh rsa-authentication
– displays the RSA authorized keys.
ip ssh rsa-authentication (Config)
– enables RSA authentication.
ip ssh server
Configure an SSH server.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
NOTE: Some of the parameters in this command require licensing to access. For more
information, contact your Dell Force10 representative.
ip ssh server {enable | port
port-number
} [version {1 | 2}]
To disable SSH server functions, use the
no ip ssh server enable
command.
Parameters
enable
Enter the key word
enable
to start the SSH server.
port
port-number
(OPTIONAL) Enter the keyword
port
followed by the port number of
the listening port of the SSH server. The range is 1 to 65535. The
default is 22.
[version {1 | 2}]
(OPTIONAL) Enter the keyword
version
followed by the SSH
version 1 or 2 to specify only SSHv1 or SSHv2.
NOTE: If you enable FIPS mode, you can only select version 2.
Defaults
Default listening port is 22.
Command Modes
CONFIGURATION
Command History
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
1332
Summary of Contents for Force10 Z9000
