Command History
Version 8.3.12.0
Introduced on the S4810.
Version 7.6.1.0
Introduced on the C-Series and S-Series.
Version 7.4.1.0
Introduced on the E-Series.
Usage
Information
When you configure the
dot1x server-timeout
value, take into account the
communication medium used to communicate with an authentication server and the number of
RADIUS servers configured. Ideally, the
dot1x server-timeout
value (in seconds) is
based on the configured RADIUS-server timeout and retransmit values and calculated
according to the following formula:
dot1x server-timeout
seconds
> (radius-server
retransmit
seconds
+ 1) * radius-server timeout
seconds
.
Where the default values are as follows:
dot1x server-timeout
(30 seconds), radius-
server retransmit (3 seconds), and radius-server timeout (5 seconds).
For example:
FTOS(conf)#radius-server host 10.11.197.105 timeout 6
FTOS(conf)#radius-server host 10.11.197.105 retransmit 4
FTOS(conf)#interface gigabitethernet 2/23
FTOS(conf-if-gi-2/23)#dot1x server-timeout 40
dot1x supplicant-timeout
Configure the amount of time after which exchanges with the supplicant time-out.
C-Series, E-Series, S-Series, S4810
Syntax
dot1x supplicant-timeout
seconds
To return to the default, use the
no dot1x supplicant-timeout
command.
Parameters
seconds
Enter a time-out value in seconds. The range is 1 to 300, where 300 is
implementation dependant. The default is 30.
Defaults
30 seconds
Command Modes
INTERFACE
Command History
Version 8.3.12.0
Introduced on the S4810.
Version 7.6.1.0
Introduced on the C-Series and S-Series.
Version 7.4.1.0
Introduced on the E-Series.
205
Summary of Contents for Force10 Z9000
