debug bfd
Enable BFD debugging.
C-Series, E-Series
Syntax
debug bfd {detail | event | packet} {all |
interface
} [mode]
[count
number
]
Parameters
detail
(OPTIONAL) Enter the keyword
detail
to display detailed
information about BFD packets.
event
(OPTIONAL) Enter the keyword
event
to display information about
BFD state. The mode option is not available with this option.
packet
(OPTIONAL) Enter the keyword
packet
to display brief information
about control packets.
all
Enter the keyword
all
to enable debugging on all interfaces. The
count option is not available with this option.
interface
(OPTIONAL) Enter one of the following keywords and slot/port or
number information:
•
For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet
and then enter the slot/port
information.
•
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet
and then enter the slot/port
information.
•
For a SONET interface, enter the keyword
sonet
and then
enter the slot/port information.
•
For a port-channel interface, enter the keyword
port-
channel
and then enter a number. For the C-Series, the
range is 1 to 128. For the E-Series, the range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
•
For VLAN interfaces, enter the keyword
vlan
and then enter
a number from 1 to 4094. For ExaScale VLAN interfaces, the
range is 1 to 2730 (VLAN IDs can be 0 to 4093).
mode
(OPTIONAL) Enter one of the following debug transmission modes:
•
Enter the keyword
both
to display information for both
received and sent packets.
•
Enter the keyword
rx
to display information for received
packets.
•
Enter the keyword
tx
to display information for sent packets.
The default is both.
count
number
(OPTIONAL) Enter the keywords
count number
followed by the
number of debug messages to display. The range is 1 to 65534. The
default is Infinite—that is, if a count number is not specified, an
infinite number of debug messages display.
319
Summary of Contents for Force10 Z9000
