Version 7.7.1.0
Introduced on the C-Series.
Version 7.5.1.0
Introduced
Related
Commands
capture bgp-pdu neighbor
– enables capture of an IPv4 BGP neighbor packet.
capture bgp-pdu neighbor (ipv6)
– enables capture of an IPv6 BGP neighbor packet.
show capture bgp-pdu neighbor
– displays BGP packet capture information for an IPv6
address on the E-Series.
clear ip bgp
Reset BGP sessions on the E-Series. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting
the TCP connection.
C-Series, E-Series, S-Series, Z-Series
Syntax
clear ip bgp * |
as-number
|
ip-address
[flap-statistics | soft
[in | out]]
Parameters
*
Enter an asterisk ( * ) to reset all BGP sessions.
as-number
Enter the AS number to reset all neighbors belonging to that AS. The
range is 0 to 65535 (2-byte), 1 to 4294967295 (4-byte), or 0.1 to
65535.65535 (dotted format).
ip-address
Enter an IP address in dotted decimal format to reset all prefixes from
that neighbor.
flap-statistics
(OPTIONAL) Enter the keyword
flap-statistics
to reset the
flap statistics on all prefixes from that neighbor.
soft
(OPTIONAL) Enter the keyword
soft
to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
NOTE: If you enter the
clear ip bgp ip-address soft
command, both inbound and outbound policies are reset.
in
(OPTIONAL) Enter the keyword
in
to activate only inbound policies.
out
(OPTIONAL) Enter the keyword
out
to activate only outbound
policies.
<1-4294967295>
Enter <1-4294967295> to clear peers with the AS number.
<0.1-65535.65535>
Enter <0.1-65535.65535> to clear peers with the AS number in dot
format.
A.B.C.D
Enter the BGP neighbor address in the A.B.C.D format to clear.
X:X:X:X::X
Enter the BGP neighbor address in the X:X:X:X::X format to clear.
dampening
Enter the keyword
dampening
to clear the flap dampening
information.
348
Summary of Contents for Force10 Z9000
