Command Modes
ROUTER BGP
Command History
Version 8.3.11.1
Introduced on the Z9000.
Version 7.8.1.0
Introduced on the S-Series.
Version 7.7.1.0
Introduced on the C-Series.
Usage
Information
If you configure the
set next-hop
command in ROUTE-MAP mode, its configuration takes
precedence over the
neighbor next-hop-self (C-, E-, and S-Series)
command.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
neighbor {
ip-address
|
peer-group-name
} password [
encryption-
type
] password
To delete a password, use the
no neighbor {
ip-address
|
peer-group-name
}
password
command.
Parameters
ip-address
Enter the IP address of the router to be included in the peer group.
peer-group-name
Enter the name of a configured peer group.
encryption-type
(OPTIONAL) Enter
7
as the encryption type for the password entered.
7
means that the password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The first character of the
password must be a letter.
You cannot use spaces in the password.
Defaults
Not configured.
Command Modes
ROUTER BGP
Command History
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.8.1.0
Introduced on the S-Series.
Version 7.7.1.0
Introduced on the C-Series.
Usage
Information
Configure the same password on both BGP peers or a connection does not occur. When you
configure MD5 authentication between two BGP peers, each segment of the TCP connection
between them is verified and the MD5 digest is checked on every segment sent on the TCP
connection.
Configuring a password for a neighbor causes an existing session to be torn down and a new
one established.
369
Summary of Contents for Force10 Z9000
