Dell Force10 Z9000 Reference Manual Download

Page: 421 / 1483

Command History

Version 7.8.1.0

Introduced on the S-Series.

Version 7.7.1.0

Introduced on the C-Series.

Version 7.6.1.0

Introduced IPv6 MGBP on the E-Series.

clear ip bgp flap-statistics

Clear BGP flap statistics, which includes number of flaps and the time of the last flap.

C-Series, E-Series TeraScale, S-Series

Syntax

clear ip bgp ipv4 multicast flap-statistics network | filter-
list

list

|regexp

regexp

Parameters

Network

(OPTIONAL) Enter the network address to clear flap statistics in
dotted decimal format (A.B.C.D).

filter-list

as-path-

name

(OPTIONAL) Enter the keyword

filter-list

followed by the

name of a configured AS-PATH list (maximum 16 characters).

regexp

regular-

expression

(OPTIONAL) Enter the keyword

regexp

followed by regular

expressions. Use one or a combination of the following:

•

= (period) any single character (including a white space).

•

= (asterisk) the sequences in a pattern (0 or more

sequences).

•

= (plus) the sequences in a pattern (1 or more sequences).

•

= (question mark) sequences in a pattern (either 0 or 1

sequences).

NOTE: You must enter an escape sequence (CTRL+v) prior

to entering the

regular expression.

•

[ ]

= (brackets) a range of single-character patterns.

•

( )

= (parenthesis) groups a series of pattern elements to a

single element.

•

{ }

= (braces) minimum and the maximum match count.

•

= (caret) the beginning of the input string. If you use the

caret at the beginning of a sequence or range, it matches on

everything BUT the characters specified.

•

= (dollar sign) the end of the output string.

Command Modes

EXEC Privilege

Command History

Version 7.8.1.0

Introduced on the S-Series.

Version 7.7.1.0

Introduced on the C-Series.

Version 7.6.1.0

Introduced IPv6 MGBP on the E-Series.

421

Summary of Contents for Force10 Z9000












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 Z9000

Reviews:

Related manuals for Force10 Z9000

Brands by name

Popular brands

Dell Force10 Z9000, Reference Manual

Search results

Summary of Contents for Force10 Z9000

Reviews:

Related manuals for Force10 Z9000

Brands by name

Popular brands