Dell Force10 Z9000 Reference Manual Download

Page: 429 / 1483

neighbor remove-private-as

Remove private AS numbers from the AS-PATH of outgoing updates.

C-Series, E-Series TeraScale, S-Series

Syntax

neighbor {

ip-address

peer-group-name

} remove-private-as

To return to the default, use the

no neighbor {

ip-address

peer-group-name

}

remove-private-as

command.

Parameters

ip-address

Enter the IP address of the neighbor to remove the private AS
numbers.

peer-group-name

Enter the name of the peer group to remove the private AS numbers.

Defaults

Disabled (that is, private AS numbers are not removed).

Command Modes

ROUTER BGP Address Family (conf-router_bgp_af)

Command History

Version 7.8.1.0

Introduced on the S-Series.

Version 7.7.1.0

Introduced on the C-Series. Added 4-byte support.

Version 7.6.1.0

Introduced IPv6 MGBP on the E-Series.

neighbor route-map

Apply an established route map to either incoming or outbound routes of a BGP neighbor or peer group.

C-Series, E-Series TeraScale, S-Series

Syntax

neighbor {

ip-address

peer-group-name

} route-map

map-name

{in

| out}

To remove the route map, use the

no neighbor {

ip-address

peer-group-

name

} route-map

map-name

{in | out}

command.

Parameters

ip-address

Enter the IP address of the neighbor in dotted decimal format.

peer-group-name

Enter the name of the peer group.

map-name

Enter the name of an established route map.
If the Route map is not configured, the default is deny (to drop all
routes).

Enter the keyword

to filter inbound routes.

out

Enter the keyword

out

to filter outbound routes.

Defaults

Not configured.

Command Modes

ROUTER BGP Address Family (conf-router_bgp_af)

429

Summary of Contents for Force10 Z9000












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 Z9000

Reviews:

Related manuals for Force10 Z9000

Brands by name

Popular brands

Dell Force10 Z9000, Reference Manual

Search results

Summary of Contents for Force10 Z9000

Reviews:

Related manuals for Force10 Z9000

Brands by name

Popular brands