configured
(OPTIONAL) View information on all IPv6 configured interfaces.
gigabitethernet
(OPTIONAL) View information for an IPv6 gigabitethernet interface.
linecard
slot-
number
(OPTIONAL) View information for a specific IPv6 linecard or S-Series
stack-unit:
•
The range is 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on
a E300
•
The range is 0 to 7 for C-Series
•
The range is 0 to 7 for S55 only
•
The range is 0 to 11 for S60 and S4810
managementethe
rnet
slot/ port
(OPTIONAL) View information on an IPv6 Management port. Enter the
slot number (0-1) and port number zero (0).
loopback
(OPTIONAL) View information for IPv6 loopback interfaces.
port-channel
(OPTIONAL) View information for IPv6 port channels.
tengigabitetherne
t
(OPTIONAL) View information for an IPv6 tengigabitethernet
interface.
fortyGigE
(OPTIONAL) View information for an IPv6 fortygigabitethernet
interface.
vlan
(OPTIONAL) View information for IPv6 VLANs.
Defaults
none
Command Modes
•
EXEC
•
EXEC Privilege
Command History
Version 9.0.0.0
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 8.5.1.0
Added support for 4-port 40G line cards on ExaScale.
Version 8.4.2.1
Introduced on the S-Series.
Version 8.2.1.0
Introduced on the E-Series ExaScale. Added support for the
managementethernet slot/port
parameter.
Version 7.8.1.0
Introduced on the C-Series.
Version 7.4.1.0
Introduced on the E-Series TeraScale.
Usage
Information
The Management port is enabled by default (
no shutdown
). If necessary, use the
ipv6
address
command to assign an IPv6 address to the Management port.
Example
FTOS#
FTOS#show ipv6 int te 0/5
TenGigabitEthernet 0/5 is up, line protocol is up
IPV6 is enabled
Link Local address: fe80::201:e8ff:fe8a:e8f7
Global Unicast address(es):
851
Summary of Contents for Force10 Z9000
