c. If you have replaced the primary storage device that had the operating system installed, see
Reinstall Windows 10 to
the Dell factory image using recovery media
in the knowledge base article
.
Removing the 2280 solid-state drive/Intel Optane memory module
in M.2 slot one
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
NOTE:
This procedure applies only to computers shipped with a 2280 solid-state drive installed in M.2 slot one.
NOTE:
Depending on the configuration ordered, your computer may support either 2230 solid-state drive or 2280 solid-
state drive in M.2 slot one.
The following image indicates the location of the 2280 solid-state drive/Intel Optane memory module installed in M.2 slot one
and provides a visual representation of the removal procedure.
Steps
1. Remove the two screws (M2x3) that secure the solid-state drive bracket to the system board and the palm-rest and
keyboard assembly.
2. Lift the solid-state drive bracket off the palm-rest and keyboard assembly.
3. Slide and lift the solid-state drive/Intel Optane memory module off the SSD1 slot on the system board.
Installing the 2280 solid-state drive/Intel Optane memory module
in M.2 slot one
Prerequisites
If your are replacing a component, remove the existing component before performing the installation procedure.
20
Removing and installing components