background image

Back to Contents Page

  

 

 Thermal Cooling Assembly  

Dell Inspiron M5040/15-N5040/15-N5050 Owner's Manual  

  

Removing the Thermal Cooling Assembly 

 

  

Replacing the Thermal Cooling Assembly 

 

 

 

 

 

 

 

 

 

Removing the Thermal Cooling Assembly  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the battery. See 

Removing the Battery

.  

 

 

  

3.

Follow the instructions from 

step 3

 to 

step 8

 in 

Removing the Palm-Rest Assembly

.  

 

 

  

4.

Disconnect the display cable from the connector on the system board and peel the cable off the thermal cooling assembly.  
 

 

  

5.

Disconnect the fan cable from the connector on the system board.  
 

 

  

6.

In sequential order (indicated on the thermal cooling assembly), loosen the four captive screws that secure the thermal cooling assembly to the system 
board.  
 

 

  

7.

Lift the thermal cooling assembly away from the computer.  
 

  

 

Replacing the Thermal Cooling Assembly  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Align the four captive screws on the thermal cooling assembly with the screw holes on the system board and tighten the screws in sequential order 
(indicated on the thermal cooling assembly).  
 

 

  

3.

Connect the fan cable to the connector on the system board.  
 

 

  

4.

Attach the display cable to the thermal cooling assembly and connect the display cable to the connector on the system board.  
 

 

  

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is 

not covered by your warranty.

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

To help prevent damage to the system board, remove the main battery, see 

Removing the Battery

, before working inside the computer.

1  captive screws (4) 

2  thermal cooling assembly 

3  fan cable 

4  display cable 

Summary of Contents for Inspirion M5040









































Reviews: