background image

Back to Contents Page

  

 

 Support Brackets  

Dell™ Inspiron™ 1018 Service Manual 

 

  

Removing the Support Brackets 

 

  

Replacing the Support Brackets 

 

 

 

 

 

 

 

 

 

Removing the Support Brackets  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the battery (see 

Removing the Battery

).  

 

 

  

3.

Remove the keyboard (see 

Removing the Keyboard

).  

 

 

  

4.

Remove the hard-drive assembly (follow the instructions from 

step 4

 to 

step 6

 in 

Removing the Hard Drive

).  

 

 

  

5.

Remove the palm rest assembly (see 

Removing the Palm Rest Assembly

).  

 

 

  

6.

Remove the memory module (see 

Removing the Memory Module

)  

 

 

  

7.

Remove the middle cover (see 

Removing the Middle Cover

).  

 

 

  

8.

Remove the display assembly (see 

Removing the Display Assembly

).  

 

 

  

9.

Lift the right and left support brackets off the computer base.  
 

  

 

Replacing the Support Brackets  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To help prevent damage to the system board, remove the main battery (see 

Removing the Battery

) before working inside the 

computer.

1  left support bracket 

2  right support bracket 

Summary of Contents for Inspiron 1018















































Reviews: