Back to Contents Page
Memory-Module Cover
Dell™ Inspiron™ N3010 Service Manual
Removing the Memory-Module Cover
Replacing the Memory-Module Cover
Removing the Memory-Module Cover
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Loosen the captive screw that secures the memory-module cover to the computer base.
4.
Pry the memory-module cover up and lift it out of the computer base.
Replacing the Memory-Module Cover
1.
Follow the instructions in
Before You Begin
.
2.
Align the tabs on the memory-module cover with the slots on the computer base and place the memory-module cover in position.
3.
Gently snap the memory-module cover into place.
4.
Tighten the captive screw that secures the memory-module cover to the computer base.
5.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for
other Dell computers.
1
captive screw
2
memory-module cover
3
memory-module cover tabs (3)
Summary of Contents for Inspiron 13 N3010
Page 42: ......
