Replacing the Touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide and replace the touchpad into its slot on the palm rest.
2
Align the screw holes on the touchpad with the screw holes on the palm
rest.
3
Replace the screws that secure the touchpad to the palm rest.
4
Follow the procedure from step 3 to step 9 in “Replacing the
Palm Rest
”.
1
touchpad
2
screws (2)
Post-requisites
1
Replace the
hard drive
.
2
Replace the
wireless card
.
3
Replace the
memory module(s)
.
4
Replace the
base cover
.
47
Summary of Contents for Inspiron 14
