Replacing the palm rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Follow the procedure from step 1 to step 3 in “
Replacing the speakers
”.
2
Follow the procedure from step 1 to step 4 in “
Replacing the power-
button board
”.
3
Follow the procedure from step 1 to step 5 in “
Replacing the touch pad
”.
4
Slide the speaker cable through the slot on the computer base.
5
Align the screw holes on the palm-rest assembly with the screw holes on
the computer base.
6
Replace the screws that secure the palm-rest assembly to the computer
base.
7
Slide the touch-pad cable and the power-button cable into the system
board and press down on the latches to secure the cables.
8
Close the display and turn the computer over.
9
Replace the screws that secure the palm-rest assembly to the computer
base.
10
Connect the speaker cable to the system board.
11
Turn the computer over and open the display.
Post-requisites
1
Replace the
keyboard
.
2
Follow the procedure from step 4 to step 6 in “
Replacing the hard drive
”.
3
Replace the
base cover
.
4
Replace the
battery
.
38
Summary of Contents for Inspiron 14
