Steps
1. Align the slot on the memory module with the notch on the memory module slot on the system board.
2. Slide the memory module into the slot on the system board.
3. Press down on the memory module to snap it into place.
4. Ensure that the securing clips have locked the memory module into place.
NOTE:
If the securing clips do not lock the memory module into place remove the memory module from the slot and
repeat steps 1 to 3.
5. Repeat the above procedure for the second memory module.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
Speakers
Removing the speakers
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
About this task
The following images indicate the location of the speakers and provides a visual representation of the removal procedure.
32
Removing and installing components
