Back to Contents Page
USB/Audio Board
Dell™ Inspiron™ 1564 Service Manual
Removing the USB/Audio Board
Replacing the USB/Audio Board
Removing the USB/Audio Board
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the optical drive (see
Removing the Optical Drive
).
4.
Remove the module cover (see
Removing the Module Cover
).
5.
Remove the power button panel (see
Removing the Power Button Panel
).
6.
Remove the keyboard (see
Removing the Keyboard
).
7.
Remove the palm rest (see
Removing the Palm Rest
).
8.
Lift the connector latch and slide the USB/audio cable out of the connector on the USB/audio board.
9.
Remove the screw that secures the USB/audio board to the computer base.
10.
Lift the USB/audio board and ease the USB and audio connectors out of the computer base.
Replacing the USB/Audio Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
USB/audio cable
2
connector latch
3
connector on USB/audio board
4
USB/audio board
5
screw