Steps
1. Align the notch on the M.2 2230 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the M.2 2230 solid-state drive into the M.2 card slot on the system board.
3. Slide the tab on the M.2 2230 thermal shield into the M.2 card slot and align the screw hole on the thermal shield to the
screw hole on the system board.
4. Replace the screw (M2x3) that secures the M.2 2230 thermal shield to the system board.
Next steps
1. Install the
.
2. Exit
.
After working inside your computer
.
Wireless card
Removing the wireless card
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
.
About this task
The following image(s) indicate the location of the wireless card and provides a visual representation of the removal procedure.
24
Removing and installing components
