Power
NOTE: This option can be configured only if the Auto
Power On mode is set to Enabled 1 to 31 (15 by
default).
Auto Power On
Time
Allows you to set the time at which the computer must turn on
automatically.
NOTE: This option can be configured only if the Auto
Power On mode is set to Enabled hh:mm:ss (12:30:30
by default).
Deep Sleep Control Allows you to set Deep Sleep Mode — Disabled. Enabled in S5
(computer is off) only, Enabled in S4 (Hibernate state of
computer)and S5 by default.
Table 11. Security options
Security
Supervisor
Password
Displays the supervisor password.
User Password
Displays the user password.
Set User Password Allows you to set, change, or clear the user password.
Password Check
Allows you to enable password verification either when you
attempt to enter system setup or each time the computer
boots Setup or Always (Setup by default).
NOTE: Password Check option is visible only when the
user password is set.
Set Supervisor
Password
Allows you to set, change, or delete the supervisor password.
The supervisor password controls access to the system setup
utility.
NOTE: Deleting the supervisor password deletes the
user password. Set the supervisor password before
setting the user password.
User Access Level
Allows you to restrict or provide access to the system setup
utility — No Access, View Only, Limited, or Full Access (Full
Access by default).
125
Summary of Contents for Inspiron 24 5000 Series
